Product description

The Aerolifter is designed to load and unload air cargo containers of different shapes and sizes into airplanes where there is no permanent infrastructure available. It is also very suitable for the transportation of fragile cargo load containers.

To load the cargo containers inside the airplane you only need compressed air and an airtight surface to move on.

The principle of transportation is based on air caster technology. The air casters operate by means of a flexible rubber membrane that is fed by compressed air. A controlled leakage of the compressed air creates a thin air film between the floor and the air caster. The air caster can float 1/250 inch above the floor with virtually no friction. It only requires 1lbs of pulling force to move a weight of 1,000lbs


Weight (and fuel) savings on the cargo handling equipment

Can be used for every type of ULD and other containers

No point loads on the aircraft deck and the bottom of the containers

Not attached to airplane, so no certification needed

Accurate positioning of the cargo containers

Virtually friction free movement of cargo containers

Simple construction requires very low maintenance

Can be operated by a single person

No high investment in infrastructure needed

No high investment for automated cargo handling equipment in the plane needed


Option 1

An external logistical device supplies the air cargo container inside the airplane. The Aerolifter picks up the container and one employee moves it to the correct position inside the airplane. After fixing the cargo load to the airplane’s body, the Aerolifter can leave the plane.

Option 2

The Aerolifter is loaded onto a truck together with the cargo container already in place. When connected to the plane, the Aerolifter together with the cargo can be transported inside the airplane in the same way as described under option 1.

In search of an internal transport system?